fully automatic Mineral water bottling plant

AUTOMATICROTARY RINSING, FILLING AND CAPPING MACHINE

This is a Unblock Machine were all the three sections are on the same Platform. The main platform structure will be of M. S. suitably clayed Stainless Steel

The machine is attached with an in feed Air Blow Tunnel, Which is also fitted with an Air Blower on top of the Tunnel along with a Flow Regulating Valve for regulating the Air pressure. The Suction of the Air Blower is fitted with an Air Filter.

This Tunnel helps the bottle to travel to the Rinsing In feed Neck guide plate with the help of Neck Guide and Air Pressure.

BOTTLE RINSER:The bottles from the in feed Neck Guide Plate are gripped by two pair of fingers i, e Bottle Neck holder bracket assembly The gripping fingers will hold the bottle by neck and necessary guide bars will invert the bottle upside downy 180 degree.The duty inverted bottle will-receive water from the rinsing nozzles on rear of the machine. The rinsing will operate from 90 to 270 degree rotation of the rinsing machine. Zero degree position is in front of the operator.In 180-degree rotation the washing cycles will be stopped and bottles will be re- inverted and delivered to the Out feed Neck guide plate, which will transfer the bottle to the filler.

BOTTLE FILLER/CAPER:The Neck holder of the filler will hold the bottle along with the help of external guide.

Filling machine is also a neck holding. On Rotation When bottle gets sealed with filling valve,the filling valve opens and filling starts.

Filling tank will have liquid  probe system to control level of mineral water in filling tank.As soon as the bottle is fill and during rotation of the machines valve will be closed and bottle will be lowered and transferred on the Neck Guide Plate

The bottle will enter the capping turret and by adjustable chucks, caps will be firmly tightened.Duly capped bottles will be transferred on the conveyor.Drive system will consist of motor, gearbox and gear trains to drive. The machine also has in A/C drive for controlling the speed of the machine.In neck holding machine change part is required only in feed and out feed of the machine.It also has a cap elevator for feeding the cap to the chute.The machine will be enclosed with SS Frame Cabinet with Transparent Sheet.This machine is suitable for 28 mm Perform having 26 mm neck diameter below the collar.

The machine can fill bottle having maximum 100 mm diameter & 330 mm height. The machine can also redesigned as per your specification.