Bottle Rinsing, Filling & Capping M/C

Quotation of Automatic Mineral Water Bottling Pet bottle heavy duty filling machine  (30 BPM) for 200 ml to 2000 ml   

We are pleased to send quotation for our automatic NECK holding , filling & capping machine

150 BPM ,for bottling non carbonated mineral water in standard range of PET bottles  and plastic cap sealing.

The machine is composed of: 

INFEED CONVEYOR / AIR BLOW CONVEYOR:

8feet long infeed conveyor with  S.S. guided. Empty bottles have to be loaded manually on this conveyor.

RINSING SYSTEM (6 head)

The bottles are automatically picked by the rinsing rotor, using spring loaded grippers. Bottles are inverted automatically to start the rinsing cycle which in most cases used product  water  as  the  rinse  medium.  Mechanical  rinse  valve  provides the  feature, which  safeguards against  wastage  of  treated  water.  Than  after bottles are held at the neck, there is no distortion of the bottle profile. At the end of the rinsing cycle, the bottle is drained of most residual water, before being straightened out and handed over to the filling rotor.

FILLING SYSTEM (6head)

The filling system fills every bottles to the desired volume adopting the Vent pipe filling principle  for  accurate  filling.The mechanical  spring loaded  filling valves  are actuated automatically by the bottles when lifted up to commence filling.In this stage again the bottles are held at the neck by neck holding lifters. The machine operating speed can be varied using variable speed AC drive.

In capping system the bottles held at the neck firmly during capping to produce absolutely leak proof results. Caps are feed into the machine by an automatic cap elevator with an SS

304  ground  level  hopper  which  can  accommodate  upto  two  thousand  caps.  The  cap elevator feed caps at the desired rates to the cap pickup rotor of the machine.

OUTFEED CONVEYOR